The Kernel Concurrency Sanitizer (KCSAN)

The Kernel Concurrency Sanitizer (KCSAN) is a dynamic race detector, which relies on compile-time instrumentation, and uses a watchpoint-based sampling approach to detect races. KCSAN’s primary purpose is to detect data races.

Usage

KCSAN is supported by both GCC and Clang. With GCC we require version 11 or later, and with Clang also require version 11 or later.

To enable KCSAN configure the kernel with:

CONFIG_KCSAN = y

KCSAN provides several other configuration options to customize behaviour (see the respective help text in lib/Kconfig.kcsan for more info).

Error reports

A typical data race report looks like this:

==================================================================
BUG: KCSAN: data-race in generic_permission / kernfs_refresh_inode

write to 0xffff8fee4c40700c of 4 bytes by task 175 on cpu 4:
 kernfs_refresh_inode+0x70/0x170
 kernfs_iop_permission+0x4f/0x90
 inode_permission+0x190/0x200
 link_path_walk.part.0+0x503/0x8e0
 path_lookupat.isra.0+0x69/0x4d0
 filename_lookup+0x136/0x280
 user_path_at_empty+0x47/0x60
 vfs_statx+0x9b/0x130
 __do_sys_newlstat+0x50/0xb0
 __x64_sys_newlstat+0x37/0x50
 do_syscall_64+0x85/0x260
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

read to 0xffff8fee4c40700c of 4 bytes by task 166 on cpu 6:
 generic_permission+0x5b/0x2a0
 kernfs_iop_permission+0x66/0x90
 inode_permission+0x190/0x200
 link_path_walk.part.0+0x503/0x8e0
 path_lookupat.isra.0+0x69/0x4d0
 filename_lookup+0x136/0x280
 user_path_at_empty+0x47/0x60
 do_faccessat+0x11a/0x390
 __x64_sys_access+0x3c/0x50
 do_syscall_64+0x85/0x260
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported by Kernel Concurrency Sanitizer on:
CPU: 6 PID: 166 Comm: systemd-journal Not tainted 5.3.0-rc7+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
==================================================================

The header of the report provides a short summary of the functions involved in the race. It is followed by the access types and stack traces of the 2 threads involved in the data race.

The other less common type of data race report looks like this:

==================================================================
BUG: KCSAN: data-race in e1000_clean_rx_irq+0x551/0xb10

race at unknown origin, with read to 0xffff933db8a2ae6c of 1 bytes by interrupt on cpu 0:
 e1000_clean_rx_irq+0x551/0xb10
 e1000_clean+0x533/0xda0
 net_rx_action+0x329/0x900
 __do_softirq+0xdb/0x2db
 irq_exit+0x9b/0xa0
 do_IRQ+0x9c/0xf0
 ret_from_intr+0x0/0x18
 default_idle+0x3f/0x220
 arch_cpu_idle+0x21/0x30
 do_idle+0x1df/0x230
 cpu_startup_entry+0x14/0x20
 rest_init+0xc5/0xcb
 arch_call_rest_init+0x13/0x2b
 start_kernel+0x6db/0x700

Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.3.0-rc7+ #2
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-1 04/01/2014
==================================================================

This report is generated where it was not possible to determine the other racing thread, but a race was inferred due to the data value of the watched memory location having changed. These can occur either due to missing instrumentation or e.g. DMA accesses. These reports will only be generated if CONFIG_KCSAN_REPORT_RACE_UNKNOWN_ORIGIN=y (selected by default).

Selective analysis

It may be desirable to disable data race detection for specific accesses, functions, compilation units, or entire subsystems. For static blacklisting, the below options are available:

  • KCSAN understands the data_race(expr) annotation, which tells KCSAN that any data races due to accesses in expr should be ignored and resulting behaviour when encountering a data race is deemed safe.

  • Disabling data race detection for entire functions can be accomplished by using the function attribute __no_kcsan:

    __no_kcsan
    void foo(void) {
        ...
    

    To dynamically limit for which functions to generate reports, see the DebugFS interface blacklist/whitelist feature.

  • To disable data race detection for a particular compilation unit, add to the Makefile:

    KCSAN_SANITIZE_file.o := n
    
  • To disable data race detection for all compilation units listed in a Makefile, add to the respective Makefile:

    KCSAN_SANITIZE := n
    

Furthermore, it is possible to tell KCSAN to show or hide entire classes of data races, depending on preferences. These can be changed via the following Kconfig options:

  • CONFIG_KCSAN_REPORT_VALUE_CHANGE_ONLY: If enabled and a conflicting write is observed via a watchpoint, but the data value of the memory location was observed to remain unchanged, do not report the data race.

  • CONFIG_KCSAN_ASSUME_PLAIN_WRITES_ATOMIC: Assume that plain aligned writes up to word size are atomic by default. Assumes that such writes are not subject to unsafe compiler optimizations resulting in data races. The option causes KCSAN to not report data races due to conflicts where the only plain accesses are aligned writes up to word size.

DebugFS interface

The file /sys/kernel/debug/kcsan provides the following interface:

  • Reading /sys/kernel/debug/kcsan returns various runtime statistics.

  • Writing on or off to /sys/kernel/debug/kcsan allows turning KCSAN on or off, respectively.

  • Writing !some_func_name to /sys/kernel/debug/kcsan adds some_func_name to the report filter list, which (by default) blacklists reporting data races where either one of the top stackframes are a function in the list.

  • Writing either blacklist or whitelist to /sys/kernel/debug/kcsan changes the report filtering behaviour. For example, the blacklist feature can be used to silence frequently occurring data races; the whitelist feature can help with reproduction and testing of fixes.

Tuning performance

Core parameters that affect KCSAN’s overall performance and bug detection ability are exposed as kernel command-line arguments whose defaults can also be changed via the corresponding Kconfig options.

  • kcsan.skip_watch (CONFIG_KCSAN_SKIP_WATCH): Number of per-CPU memory operations to skip, before another watchpoint is set up. Setting up watchpoints more frequently will result in the likelihood of races to be observed to increase. This parameter has the most significant impact on overall system performance and race detection ability.

  • kcsan.udelay_task (CONFIG_KCSAN_UDELAY_TASK): For tasks, the microsecond delay to stall execution after a watchpoint has been set up. Larger values result in the window in which we may observe a race to increase.

  • kcsan.udelay_interrupt (CONFIG_KCSAN_UDELAY_INTERRUPT): For interrupts, the microsecond delay to stall execution after a watchpoint has been set up. Interrupts have tighter latency requirements, and their delay should generally be smaller than the one chosen for tasks.

They may be tweaked at runtime via /sys/module/kcsan/parameters/.

Data Races

In an execution, two memory accesses form a data race if they conflict, they happen concurrently in different threads, and at least one of them is a plain access; they conflict if both access the same memory location, and at least one is a write. For a more thorough discussion and definition, see “Plain Accesses and Data Races” in the LKMM.

Relationship with the Linux-Kernel Memory Consistency Model (LKMM)

The LKMM defines the propagation and ordering rules of various memory operations, which gives developers the ability to reason about concurrent code. Ultimately this allows to determine the possible executions of concurrent code, and if that code is free from data races.

KCSAN is aware of marked atomic operations (READ_ONCE, WRITE_ONCE, atomic_*, etc.), but is oblivious of any ordering guarantees and simply assumes that memory barriers are placed correctly. In other words, KCSAN assumes that as long as a plain access is not observed to race with another conflicting access, memory operations are correctly ordered.

This means that KCSAN will not report potential data races due to missing memory ordering. Developers should therefore carefully consider the required memory ordering requirements that remain unchecked. If, however, missing memory ordering (that is observable with a particular compiler and architecture) leads to an observable data race (e.g. entering a critical section erroneously), KCSAN would report the resulting data race.

Race Detection Beyond Data Races

For code with complex concurrency design, race-condition bugs may not always manifest as data races. Race conditions occur if concurrently executing operations result in unexpected system behaviour. On the other hand, data races are defined at the C-language level. The following macros can be used to check properties of concurrent code where bugs would not manifest as data races.

ASSERT_EXCLUSIVE_WRITER

ASSERT_EXCLUSIVE_WRITER (var)

assert no concurrent writes to var

Parameters

var

variable to assert on

Description

Assert that there are no concurrent writes to var; other readers are allowed. This assertion can be used to specify properties of concurrent code, where violation cannot be detected as a normal data race.

For example, if we only have a single writer, but multiple concurrent readers, to avoid data races, all these accesses must be marked; even concurrent marked writes racing with the single writer are bugs. Unfortunately, due to being marked, they are no longer data races. For cases like these, we can use the macro as follows:

void writer(void) {
        spin_lock(&update_foo_lock);
        ASSERT_EXCLUSIVE_WRITER(shared_foo);
        WRITE_ONCE(shared_foo, ...);
        spin_unlock(&update_foo_lock);
}
void reader(void) {
        // update_foo_lock does not need to be held!
        ... = READ_ONCE(shared_foo);
}

Note

ASSERT_EXCLUSIVE_WRITER_SCOPED(), if applicable, performs more thorough checking if a clear scope where no concurrent writes are expected exists.

ASSERT_EXCLUSIVE_WRITER_SCOPED

ASSERT_EXCLUSIVE_WRITER_SCOPED (var)

assert no concurrent writes to var in scope

Parameters

var

variable to assert on

Description

Scoped variant of ASSERT_EXCLUSIVE_WRITER().

Assert that there are no concurrent writes to var for the duration of the scope in which it is introduced. This provides a better way to fully cover the enclosing scope, compared to multiple ASSERT_EXCLUSIVE_WRITER(), and increases the likelihood for KCSAN to detect racing accesses.

For example, it allows finding race-condition bugs that only occur due to state changes within the scope itself:

void writer(void) {
        spin_lock(&update_foo_lock);
        {
                ASSERT_EXCLUSIVE_WRITER_SCOPED(shared_foo);
                WRITE_ONCE(shared_foo, 42);
                ...
                // shared_foo should still be 42 here!
        }
        spin_unlock(&update_foo_lock);
}
void buggy(void) {
        if (READ_ONCE(shared_foo) == 42)
                WRITE_ONCE(shared_foo, 1); // bug!
}
ASSERT_EXCLUSIVE_ACCESS

ASSERT_EXCLUSIVE_ACCESS (var)

assert no concurrent accesses to var

Parameters

var

variable to assert on

Description

Assert that there are no concurrent accesses to var (no readers nor writers). This assertion can be used to specify properties of concurrent code, where violation cannot be detected as a normal data race.

For example, where exclusive access is expected after determining no other users of an object are left, but the object is not actually freed. We can check that this property actually holds as follows:

if (refcount_dec_and_test(&obj->refcnt)) {
        ASSERT_EXCLUSIVE_ACCESS(*obj);
        do_some_cleanup(obj);
        release_for_reuse(obj);
}
  1. ASSERT_EXCLUSIVE_ACCESS_SCOPED(), if applicable, performs more thorough checking if a clear scope where no concurrent accesses are expected exists.

  2. For cases where the object is freed, KASAN is a better fit to detect use-after-free bugs.

Note

ASSERT_EXCLUSIVE_ACCESS_SCOPED

ASSERT_EXCLUSIVE_ACCESS_SCOPED (var)

assert no concurrent accesses to var in scope

Parameters

var

variable to assert on

Description

Scoped variant of ASSERT_EXCLUSIVE_ACCESS().

Assert that there are no concurrent accesses to var (no readers nor writers) for the entire duration of the scope in which it is introduced. This provides a better way to fully cover the enclosing scope, compared to multiple ASSERT_EXCLUSIVE_ACCESS(), and increases the likelihood for KCSAN to detect racing accesses.

ASSERT_EXCLUSIVE_BITS

ASSERT_EXCLUSIVE_BITS (var, mask)

assert no concurrent writes to subset of bits in var

Parameters

var

variable to assert on

mask

only check for modifications to bits set in mask

Description

Bit-granular variant of ASSERT_EXCLUSIVE_WRITER().

Assert that there are no concurrent writes to a subset of bits in var; concurrent readers are permitted. This assertion captures more detailed bit-level properties, compared to the other (word granularity) assertions. Only the bits set in mask are checked for concurrent modifications, while ignoring the remaining bits, i.e. concurrent writes (or reads) to ~mask bits are ignored.

Use this for variables, where some bits must not be modified concurrently, yet other bits are expected to be modified concurrently.

For example, variables where, after initialization, some bits are read-only, but other bits may still be modified concurrently. A reader may wish to assert that this is true as follows:

ASSERT_EXCLUSIVE_BITS(flags, READ_ONLY_MASK);
foo = (READ_ONCE(flags) & READ_ONLY_MASK) >> READ_ONLY_SHIFT;
ASSERT_EXCLUSIVE_BITS(flags, READ_ONLY_MASK);
foo = (flags & READ_ONLY_MASK) >> READ_ONLY_SHIFT;

Another example, where this may be used, is when certain bits of var may only be modified when holding the appropriate lock, but other bits may still be modified concurrently. Writers, where other bits may change concurrently, could use the assertion as follows:

spin_lock(&foo_lock);
ASSERT_EXCLUSIVE_BITS(flags, FOO_MASK);
old_flags = flags;
new_flags = (old_flags & ~FOO_MASK) | (new_foo << FOO_SHIFT);
if (cmpxchg(&flags, old_flags, new_flags) != old_flags) { ... }
spin_unlock(&foo_lock);

Note

The access that immediately follows ASSERT_EXCLUSIVE_BITS() is assumed to access the masked bits only, and KCSAN optimistically assumes it is therefore safe, even in the presence of data races, and marking it with READ_ONCE() is optional from KCSAN’s point-of-view. We caution, however, that it may still be advisable to do so, since we cannot reason about all compiler optimizations when it comes to bit manipulations (on the reader and writer side). If you are sure nothing can go wrong, we can write the above simply as:

Implementation Details

KCSAN relies on observing that two accesses happen concurrently. Crucially, we want to (a) increase the chances of observing races (especially for races that manifest rarely), and (b) be able to actually observe them. We can accomplish (a) by injecting various delays, and (b) by using address watchpoints (or breakpoints).

If we deliberately stall a memory access, while we have a watchpoint for its address set up, and then observe the watchpoint to fire, two accesses to the same address just raced. Using hardware watchpoints, this is the approach taken in DataCollider. Unlike DataCollider, KCSAN does not use hardware watchpoints, but instead relies on compiler instrumentation and “soft watchpoints”.

In KCSAN, watchpoints are implemented using an efficient encoding that stores access type, size, and address in a long; the benefits of using “soft watchpoints” are portability and greater flexibility. KCSAN then relies on the compiler instrumenting plain accesses. For each instrumented plain access:

  1. Check if a matching watchpoint exists; if yes, and at least one access is a write, then we encountered a racing access.

  2. Periodically, if no matching watchpoint exists, set up a watchpoint and stall for a small randomized delay.

  3. Also check the data value before the delay, and re-check the data value after delay; if the values mismatch, we infer a race of unknown origin.

To detect data races between plain and marked accesses, KCSAN also annotates marked accesses, but only to check if a watchpoint exists; i.e. KCSAN never sets up a watchpoint on marked accesses. By never setting up watchpoints for marked operations, if all accesses to a variable that is accessed concurrently are properly marked, KCSAN will never trigger a watchpoint and therefore never report the accesses.

Key Properties

  1. Memory Overhead: The overall memory overhead is only a few MiB depending on configuration. The current implementation uses a small array of longs to encode watchpoint information, which is negligible.

  2. Performance Overhead: KCSAN’s runtime aims to be minimal, using an efficient watchpoint encoding that does not require acquiring any shared locks in the fast-path. For kernel boot on a system with 8 CPUs:

    • 5.0x slow-down with the default KCSAN config;

    • 2.8x slow-down from runtime fast-path overhead only (set very large KCSAN_SKIP_WATCH and unset KCSAN_SKIP_WATCH_RANDOMIZE).

  3. Annotation Overheads: Minimal annotations are required outside the KCSAN runtime. As a result, maintenance overheads are minimal as the kernel evolves.

  4. Detects Racy Writes from Devices: Due to checking data values upon setting up watchpoints, racy writes from devices can also be detected.

  5. Memory Ordering: KCSAN is not explicitly aware of the LKMM’s ordering rules; this may result in missed data races (false negatives).

  6. Analysis Accuracy: For observed executions, due to using a sampling strategy, the analysis is unsound (false negatives possible), but aims to be complete (no false positives).

Alternatives Considered

An alternative data race detection approach for the kernel can be found in the Kernel Thread Sanitizer (KTSAN). KTSAN is a happens-before data race detector, which explicitly establishes the happens-before order between memory operations, which can then be used to determine data races as defined in Data Races.

To build a correct happens-before relation, KTSAN must be aware of all ordering rules of the LKMM and synchronization primitives. Unfortunately, any omission leads to large numbers of false positives, which is especially detrimental in the context of the kernel which includes numerous custom synchronization mechanisms. To track the happens-before relation, KTSAN’s implementation requires metadata for each memory location (shadow memory), which for each page corresponds to 4 pages of shadow memory, and can translate into overhead of tens of GiB on a large system.